CT-101 Wireless Call Button

$75.00

The CT-101 Wireless Call Button is a compact transmitter  capable of sending a text message directly to pocket pagers, alphanumeric LED message boards and central monitoring stations. In addition, the CT-101 can send an activation command to wireless PA speakers for pre-programmed message playback, remotely initiate a two-way intercom communication and activate wireless corridor dome lights.


  • Sends text messages to pagers or LED message boards
  • Can activate wireless PA speakers, strobe lights and sirens
  • 300′-1000′ range (up to 1 mile with a repeater)
  • LED transmission indicator
  • Built-in supervision monitoring feature
  • Low battery and call repeat alerts
  • Long-life single Lithium battery
  • Built-in magnetic switch for call cancel
    • 3.5 $
    • 7 $
    • 14 $
    • 7 $
    • 5 $
    • 7 $
SKU: CT-101 Category:

Description

The CT-101 Wireless Call Button is a compact transmitter that is capable of sending text messages directly to pocket pagers, alphanumeric LED message boards and central monitoring stations. In addition, the CT-101 can send an activation command to wireless PA speakers for pre-programmed message playback, remotely initiate a two-way intercom communication and activate wireless corridor dome lights.

The CT-101 can be programmed into “System Mode” where all its transmissions are being received and processed by a central paging controller such as the VS4810 or VNS5100. In this configuration, the paging controller unit can initiate an automated sequence of paging events according to a pre-defined script for every CT-101 activity.

The CT-101 wireless call button offers unique features such as:

  • Elevated Alert: Sends alert to supervisor pager when the call is not being cleared within pre-defined period of time.
  • Alert Repeat: Repeat the alert (up to 9 times) as long as the call is not being cleared within pre-defined period of time.
  • Delayed Activation: Delay the call transmission for a pre-defined time and will send alert if the call is not cleared.
  • Supervision: Sends periodical status transmissions according to pre-defined intervals.
  • Low Battery Alert: Automatically send a message to report low battery status.
  • Cancel: Activate a built-in magnetic switch to cancel the call by swiping a magnet over the unit.

This water-resistant compact transmitter can come with an optional bead necklace, belt clip and wrist strap.

Product Data Sheet

Additional information

Weight 1 lbs
Dimensions 6 × 3 × 3 in
Dimensions

1.8" x 2.4" x 0.8" (W x H x D)

Weight

0.1 lbs.

Power

Single CR2 3V Lithium Battery

Color

Off-White, Gray Buttons

Operating Temperature

32° – 140°F

Humidity

0% – 90%, Non-Condensing

RF Power

10 mW

Programming

PC Based Programming

Call Cancel

Internal Magnetic Switch

Signaling Time

2-4 Seconds

Stability

Better than 5 PPM

Frequency

400-420 MHz, 450-470 MHz

Paging Format

POCSAG, 512, 1200 or 2400 BPS

Channel Spacing

12.5 KHz – Narrow Band

Activation Codes

4 (Calls, Cancel & Low Battery)

Limited Warranty

One Year Parts and Labor

You may also like…

We use cookies to provide and improve our services. By using our site, you consent to cookies. OK