CT-156 Wireless Call Cord Station

$105.00

The CT-156 Wireless Call Cord Station is a compact wall-mount transmitter that is capable of sending text message directly to pocket pagers, alphanumeric LED message boards and central monitoring stations. In addition, the CT-156 can send activation command to wireless PA speakers for pre-programmed message playback, remotely initiate a two-way intercom communication and activate wireless corridor dome lights.


  • Sends text messages to pagers or LED message boards
  • Can activate wireless PA speakers, strobe lights and sirens
  • Can initiate a Call Cancel from the station
  • Can send alert to supervisor when cord is unplugged
  • 300′-1000′ range (up to 1 mile with a repeater)
  • LED transmission indicator
  • Built-in supervision monitoring feature
  • Low battery and call repeat alerts
  • Long-life single Lithium battery

    • 16 $
    • 7 $
    • 5 $
SKU: CT-156 Category:

Description

The CT-156 Wireless Call Cord Station is a compact wall-mount transmitter that is capable of sending text message directly to pocket pagers, alphanumeric LED message boards and central monitoring stations. In addition, the CT-156 can send activation command to wireless PA speakers for pre-programmed message playback, remotely initiate a two-way intercom communication and activate wireless corridor dome lights.

The CT-156 can be programmed into “System Mode” where all its transmissions are being received and processed by a central paging controller such as the VS4810 or VNS5100. In this configuration the paging controller unit can initiate an automated sequence of paging events according to a pre-defined script for every CT-156 activity.

The CT-156 wireless call cord station offers some unique features such as:

  • Cord Disconnect Alert: Automatically send an alert when the cord is unplugged from the wall station.
  • Cancel Message: Can generate a Call Cancel by pressing the push-button three times in succession.
  • Elevated Alert: Sends alert to supervisor pager when the call is not being cleared within pre-defined period of time.
  • Alert Repeat: Repeat the alert (up to 9 times) as long as the call is not being cleared within pre-defined period of time.
  • Delayed Activation: Delay the call transmission for a pre-defined time and will send alert if the call is not cleared.
  • Supervision: Sends periodical status transmissions according to pre-defined intervals.
  • Low Battery Alert: Automatically send a message to report low battery status

* Note: A low-voltage plastic single gang box is required for optimal signal coverage. Metal box not recommended.

Product Data Sheet

Additional information

Weight 1 lbs
Dimensions 6 × 3 × 3 in
Dimensions

2.75" x 4.5" x 2.1" (W x H x D). Cord Length: 7 ft.

Weight

0.6 lbs.

Power

Single CR2 3V Lithium Battery

Color

Off-White, Gray Buttons

Operating Temperature

32° – 140°F

Humidity

0% – 90%, Non-Condensing

RF Power

10 mW

Programming

PC Based Programming

Activation Types

Momentary Switch

Signaling Time

2-4 Seconds

Stability

Better than 5 PPM

Frequency

400-420 MHz, 450-470 MHz

Paging Format

POCSAG, 512, 1200 or 2400 BPS

Channel Spacing

12.5 KHz – Narrow Band

Activation Codes

3 (Call, Cancel & Low Battery)

Limited Warranty

One Year Parts and Labor

We use cookies to provide and improve our services. By using our site, you consent to cookies. OK