Wireless Paging Controller, Outdoor – VNS2200


Out of stock

The VNS2200 Wireless Outdoor PA Controller is designed to control and drive wireless remote devices such as public address speakers, strobe lights, sirens, two-way intercom wall stations and more.

  • Weather-resistant enclosure
  • NFPA-72 (2010) compliant
  • Can drive one or two PA speakers
  • Controls one or two synchronized strobe lights
  • Can play pre-programmed voice messages and tone alerts
  • Built-in battery option for power failure protection
  • Solar power option

Out of stock

SKU: VNS2200 Category:


The VNS2200 Wireless Outdoor PA System Controller can drive one or two attached public address speakers and play pre-recorded audio alerts or live voice announcements. In addition, the VNS2200 can control one or two strobe light fixtures to provide high impact visual alerts. The VNS2200 is specifically designed for outdoor use. It can be activated and controlled individually or as a part of up to seven groups/zones for flexible unit activation from a main wireless paging controller or personal/wall-mounted transmitters.

The VNS2200 PA system controller can be expanded with additional accessories and options:

VNS2265 – Built-In receiver for FM radio reception from commercial or private FM radio stations.
VNS2286 – Two-way radio interface to provide live voice PA access to personnel with portable two-way radios.
VNS2254 – Built-in transmitter for wireless supervision and device remote testing.
VNS2281 – 2nd Speaker PA Driver if needed.
VNS2252 – Built-in power backup battery for reliable operation during power failure.
VNS2285 – Built-in contact closure output for electrical equipment control.
VNS2251 – NEMA enclosure for maximum weatherproof controller installations.
VNS2256 – Solar power package for an Eco-friendly power solution.

Product Data Sheet

Installation Guide

Additional information

Weight 3.1 lbs
Dimensions 8 × 8 × 4 in

7.5" x 4.5" x 3.0" (W x H x D), (Adaptor: 2.5" x 8" x 1.5"), Adaptor Cable: 6 ft., Power Cable: 6 ft.


1.9 lbs. (3.3 lbs. with Internal Battery)


12V DC / up to 5A Active, 50mA in Standby Mode


Light Gray

Operating Temperature

0° – 120°F


0% – 95%, Non-Condensing


50W Peak Output for 4-16 Ohms Speaker


Sealed DIN Connectors

DC Voltage Output (VNS2282 Option)

12V DC, 1A Max


RS-232 Serial Port, Optional USB Port

Transmit Format

POCSAG 512/1200 BPS

Frequency Response

50 Hz – 16 KHz (10 Hz – 3400 Hz in Live Voice Mode)


VHF (148 – 174 MHz), UHF (400 – 470 MHz)

Activation Codes


Limited Warranty

One Year Parts and Labor

Go to Top