Wireless Two-Way Intercom Station Set – VNS2216


The VNS2216 Wireless 2-Way Intercom Station is designed to provide two-way communications in installations where hard-wired intercom systems is impractical or too costly.

  • Wireless two-way voice communications with main base station
  • Can drive one or two PA speakers (VNS2281*)
  • Controls one or two synchronized beacon lights (VNS2282*)
  • Can play pre-programmed voice messages and tone alerts
  • Capable of hands-free operation (VNS2269*)
  • Built-in battery option for power failure protection (VNS2252*)
  • Can be powered by low voltage PoE power source (VNS2259*)
  • NFPA-72 (2010) compliant
    • 71 $
    • 28 $
    • 58 $
    • 39 $
    • 42 $
    • 32 $
    • 44 $
    • 61 $
SKU: VNS2216 Category:


VNS2216 – Wireless 2-Way Intercom Station

The VNS2216 Wireless 2-Way Intercom Station is designed to provide two-way communication in installations where traditional hard-wired intercom systems is impractical or too costly. In addition, the VNS2216 can drive one or two attached public address speakers for pre-recorded audio alerts or live voice announcements and control one or two strobe light fixtures to provide high impact visual alerts. The VNS2216 Wireless 2-Way Intercom Station can be activated and controlled individually or as a part of up to multiple groups/zones for flexible unit activation from a main base station, panic buttons, or wall-mount emergency call stations.

The VNS2216 can be expanded with additional accessories and options:

VNS2269 – Hands-free two-way communication option.
VNS2254 – Wireless supervision for remote unit status diagnostic and monitoring.
VNS2281 – 2nd speaker PA driver second PA speaker capability.
VNS2252 – Built-in power backup battery for reliable operation during power failure.
VNS2284 – Built-in contact closure and line level audio outputs for local wired PA or fire alarm system integration.
VNS2258 – PoE power option to utilize low voltage power source.
VNS2491 – Handset for private intercom communications.

Product Data Sheet

Controller Installation Guide

Additional information

Weight4 lbs
Dimensions12 × 12 × 6 in
Controller/Station Dimensions

Controller – 7.5" x 4.5" x 3.0", Station – 6.0" x 7.30" x 1.9" (W x H x D)

Controller/Station Weight

Controller – 1.9 lbs. (3.3 lbs. with Internal Battery), Station – 1.4 lbs.


12V DC / up to 5A Active, 50mA in Standby Mode


Controller – Light Gray, Station – Light Gray & White

Operating Temperature

0° – 120°F


0% – 95%, Non-Condensing


50W Peak Output for 4-16 Ohms Speaker


Terminal Block Plugs


USB Port

Transmit Format

POCSAG 512/1200 BPS

Frequency Response

50 Hz – 16 KHz (10 Hz – 3400 Hz in Live Voice Mode)


VHF (148 – 174 MHz), UHF (400 – 470 MHz)

Activation Codes

Up to 8

Limited Warranty

One Year Parts and Labor

You may also like…