Wireless Paging Controller – VNS2210


The VNS2210 Wireless PA Controller is designed to control and drive wireless remote devices such as public address speakers, strobe lights, sirens, two-way intercom wall stations and more.

  • Can drive one or two Public Address speakers
  • Can provide two-way intercom communication with a base station
  • Controls one or two synchronized strobe lights
  • Can play pre-programmed voice messages and alert tones
  • Built-in battery option for power failure protection
    • 28 $
    • 58 $
    • 39 $
    • 42 $
    • 32 $
    • 295 $
    • 32 $
    • 44 $
    • 61 $
    • 58 $
    • 129 $
    • 94 $
SKU: VNS2210 Category:


The VNS2210 Wireless PA Controller can drive one or two attached public address speakers and play pre-recorded audio alerts or live voice announcements. In addition, the VNS2210 can control one or two strobe light fixtures to provide high impact visual alerts. The VNS2210 wireless PA controller can be activated and controlled individually or as a part of up to seven groups/zones for flexible unit activation from a main wireless paging controller or personal/wall-mount compact transmitters.

The VNS2210 can be expanded with additional accessories and options:

VNS2267 – Intercom station for two-way communication with a main paging controller.
VNS2268 – Intercom stations for hands-free, two-way communication with a main paging controller.
VNS2254 – Built-in transmitter for wireless administration and device remote testing.
VNS2281 – 2nd speaker PA driver adaptability.
VNS2252 – Built-in power backup battery in case of a power failure.
VNS2284 – Built-in contact closure and line level audio outputs for integration with local wired PA or fire alarm systems.
VNS2264 – Ambient noise sensor option for automatic speakers level adjustment to match the surrounding environment noise level.
VNS2258 – PoE power option to utilize network power source.

Product Data Sheet

Installation Guide

Additional information

Weight 3 lbs
Dimensions 8 × 8 × 4 in

7.5" x 4.5" x 3.0" (W x H x D), (Adaptor: 2.5" x 8" x 1.5"), Adaptor Cable: 6 ft., Power Cable: 6 ft.


1.9 lbs. (3.3 lbs. with Internal Battery)


12V DC / up to 5A Active, 50mA in Standby Mode


Light Gray

Operating Temperature

0° – 120°F


0% – 95%, Non-Condensing


50W Peak Output for 4-16 Ohms Speaker

Frequency Response

50 Hz – 16 KHz (10 Hz – 3400 Hz in Live Voice Mode)


Terminal Block Plugs

DC Voltage Output

12V DC, 1A Max (VNS2282 Option)


USB Port

Activation Codes


Paging Format

POCSAG 512/1200 BPS


VHF (148 – 174 MHz), UHF (400 – 470 MHz)

Limited Warranty

One Year Parts and Labor

You may also like…

Go to Top