(877) 918-7243
CONTACT US

Wireless Panic Button, Man-Down Sensor – CT-107

$145.00

Out of stock

The CT-107 Wireless Man-Down Alarm Transmitter is triggered when the device position changes from vertical to horizontal, or when manually activated. The CT-107 sends a pre-programmed alphanumeric message to wireless paging receivers such as pocket pagers, alphanumeric LED message boards and central monitoring stations. In addition, the CT-107 can send an activation command to wireless PA speakers for pre-programmed message playback, remotely initiate two-way intercom communication and activate wireless corridor dome lights.


  • Sends text messages to pagers or LED message boards
  • Can activate wireless PA speakers, strobe lights and sirens
  • 300′-1000′ range (up to 1 mile with a repeater)
  • LED transmission indicator
  • Built-in supervision monitoring feature
  • Low battery and call repeat alerts
  • Long-life single Lithium battery
  • Built-in magnetic switch for call cancel

Out of stock

SKU: CT-107 Category:

Description

The CT-107 Wireless Man-Down Alarm Transmitter is triggered when the device position changes from vertical to horizontal, or when manually activated. The CT-107 sends a pre-programmed alphanumeric message to wireless paging receivers such as pocket pagers, alphanumeric LED message boards and central monitoring stations. In addition, the CT-107 can send an activation command to wireless PA speakers for pre-programmed message playback, remotely initiate two-way intercom communication and activate wireless corridor dome lights.

The CT-107 can be programmed into “System Mode” where all transmissions are processed by a central paging controller such as the VS4810 or VNS5100. In this configuration, the paging controller unit can initiate an automated sequence of paging events according to a pre-defined script for every CT-107 activity.

The CT-107 Man-Down Alarm Transmitter offers unique features:

  • Elevated Alert: Sends alert to supervisor pager when  call not cleared within a pre-defined period of time.
  • Alert Repeat: Repeat the alert (up to 9 times) as long as the call is not being cleared within pre-defined period of time.
  • Delayed Activation: Delay the call transmission for a pre-defined time sends alert if the call is not cleared.
  • Supervision: Sends periodical status transmissions according to pre-defined intervals.
  • Low Battery Alert: Automatically send a message to report low battery status.
  • Cancel: Activate a built-in magnetic call cancel feature (requires custom magnet swipe).

This water-resistant compact transmitter can come with belt clip.

Product Data Sheet

Additional information

Weight 1 lbs
Dimensions 6 × 3 × 3 in
Dimensions

1.8" x 2.4" x 0.8" (W x H x D)

Weight

0.1 lbs.

Power

Single CR2 3V Lithium Battery

Color

Off-White, Gray Buttons

Operating Temperature

32° – 140°F

Humidity

0% – 90%, Non-Condensing

RF Power

10 mW

Programming

PC Based Programming

Call Cancel

Internal Magnetic Switch

Signaling Time

2-4 Seconds

Stability

Better than 5 PPM

Frequency

400-420 MHz, 450-470 MHz

Paging Format

POCSAG, 512, 1200 or 2400 BPS

Channel Spacing

12.5 KHz – Narrow Band

Activation Codes

3 (Call, Cancel & Low Battery)

Limited Warranty

One Year Parts and Labor

Go to Top