CT-155 Emergency Pull Cord Station

$91.00

The CT-155 Wireless Emergency Pull Cord Station is a compact wall-mount transmitter that is capable of sending a pre-programmed alphanumeric message directly to alphanumeric receivers, such as pagers and LED message boards. The CT-155 transmitter can also send an activation command to play pre-recorded audio from PA speakers, initiate two-way intercom communication, turn on dome lights or activate other wireless receivers.


  • Sends text messages to pagers or LED message boards
  • Can activate wireless PA speakers, strobe lights and sirens
  • 300′-1000′ Range (Up to 1 Mile with a Repeater)
  • Transmission LED Indicator
  • Built-In Supervision Monitoring Feature
  • Low Battery & Call Repeat Alerts
  • Long-life Single Lithium Battery

    • 0 $
    • 16 $
    • 7 $
    • 5 $
SKU: CT-155 Category:

Description

The CT-155 Wireless Emergency Pull Cord Station is a compact wall-mount transmitter that is capable of sending text message directly to pocket pagers, alphanumeric LED message boards and central monitoring stations. In addition, the CT-155 can send activation command to wireless PA speakers for pre-programmed message playback, remotely initiate a two-way intercom communication and activate wireless corridor dome lights.

The CT-155 can be programmed into “System Mode” where all its transmissions are being received and processed by a central paging controller such as the VS4810 or VNS5100. In this configuration the paging controller unit can initiate an automated sequence of paging events according to a pre-defined script for every CT-155 activity.

The CT-155 Emergency Pull Cord Station offers some unique features such as:

  • Elevated Alert: Sends alert to supervisor pager when the call is not being cleared within pre-defined period of time.
  • Alert Repeat: Repeat the alert (up to 9 times) as long as the call is not being cleared within pre-defined period of time.
  • Delayed Activation: Delay the call transmission for a pre-defined time and will send alert if the call is not cleared.
  • Supervision: Sends periodical status transmissions according to pre-defined intervals.
  • Low Battery Alert: Automatically send a message to report low battery status

The CT-155 wireless pull station comes standard with a red pull switch, but can come with amber, blue, green or black switch instead.

* Note: A low-voltage plastic single gang box is required for optimal signal coverage. Metal box is not recommended.

Product Data Sheet

Additional information

Weight1 lbs
Dimensions6 × 3 × 3 in
Station Dimensions

2.75" x 4.5" x 1.6" (W x H x D). Cord Length: 6 ft.

Station Weight

0.22 lbs.

Power

Single CR2 3V Lithium Battery – Last up to 10 years.

Color

Frame – Off-White, Switch – Red, Black, Green, Blue, Amber

Activation Codes

Up to 6 – Call, Cancel, Supervision, Repeat, Escalation & Low Battery

Operating Temperature

32° – 140°F

Humidity

0% – 90%, Non-Condensing

Programming

PC Based Programming with USB port

Activation Types

Pull Cord Switch

Frequency

400-420 MHz, 450-470 MHz

Stability

Better than 5 PPM

RF Range

300' – 1000' (More than a mile with a Repeater).

Paging Format

POCSAG, 512, 1200 or 2400 BPS

Channel Spacing

12.5 KHz – Narrow Band

Limited Warranty

One Year Parts and Labor

You may also like…